Jump to content

marka83

Goldfish
  • Content count

    197
  • Joined

  • Last visited

Community Reputation

127 Great

About marka83

  • Rank
    Level 1

Previous Fields

  • Gender
    Male
  • Age
    30
  • Location
    Los Angeles
  • Referred By
    google
  • How many Goldfish
    one
  1. Growth Above Gill

    That's what I suspected after research. Sent from my SM-G920V using Tapatalk
  2. Test Results for the Following:* Ammonia Level(Tank) - 0ppm * Nitrite Level(Tank) - 0ppm * Nitrate level(Tank) - 10-20ppm * Ammonia Level(Tap) - 0ppm * Nitrite Level(Tap) - 0ppm * Nitrate level(Tap) - 5-10ppm * Ph Level, Tank (If possible, KH, GH and chloramines) - 7.4 - 7.6 KH/GH test off chart * Ph Level, Tap (If possible, KH, GH and chloramines) - 7.4-7.6 Other Required Info:* Brand of test-kit used and whether strips or drops? - API Drops * Water temperature? - 70 degrees F * Tank size (how many gals.) and how long has it been running? 130 gal for three months, affected fish transferred from old 47 gal tank running for two years. * What is the name and "size of the filter"(s)? - 1) Aquaclear 110 2) Cascade 1000 * How often do you change the water and how much? Weekly, 40-50% * * How many days ago was the last water change and how much did you change? - Today * * How many fish in the tank and their size? - Three goldfish and two Siamese algae eaters. Two smaller goldfish are about 2-2.5 inches, algae eaters are a similar size. Jasper is about 5-5.5 inches measure to base of rear fin. * * What kind of water additives or conditioners? - Prime, K2SO4, KH2PO4, CSM+B, Excel * * What do you feed your fish and how often? - NLS twice daily, blood worms once to twice a week, blanched spinach when I have it. * * Any new fish added to the tank? - no * * Any medications added to the tank? - no * * List entire medication/treatment history for fish and tank.Please include salt, Prazi, PP, etc and the approximate time and duration of treatment. - One does of Prazi a couple months ago. * * Any unusual findings on the fish such as "grains of salt," bloody streaks, frayed fins or fungus? - There is a growth which appears to be protruding through the scales above fish left gill plate. Growth is smooth, slightly whiter orange hue than fish. * * Any unusual behavior like staying at the bottom, not eating, etc.? - all activity and appetite normal. Sent from my SM-G920V using Tapatalk
  3. Splitting fish up.

    My 40b is 47. Plenty for a mess of plants and two begging shubunkins
  4. Is supersaturation dangerous for fish? I've been getting these bubbles too.
  5. Planted Tank Stuff

    Thanks! Let's see if we can get it all together as a functioning system. Fingers crossed. I had a basic, very very very basic, understanding of electronics from way back. What we have here was partially following some vague directions on this blog, research, and trial and error (fried board and a few fried transistors). The biggest hurdle was figuring out 1) how to properly use the transistor, 2) how to make the transistor turn off after doing what we wanted. The blog had a schematic to follow but it didn't make complete sense and we were modifying it slightly (using an alternate source for 5V power).
  6. Planted Tank Stuff

    Oh and we fried one arduino board
  7. Planted Tank Stuff

    Planted tank project is brewing. My roommate found a DIY arduino controlled dosing system online. He wants to install it on the 100 gallon saltwater tank because he has like seven bottles of stuff to dose. Anyway, he figured I'd want to make one too, and I'm a little better with electronics hardware and he is light-years better than me on the programming side. Well the schematics the tutorial gave wouldn't work on our test circuit. So I figured it out. This is just one pump. When it's done, a script on the arduino will control the dosing automatically. Once we get through all the bugs I'll post a write up in the DIY section. Here's the test phase and the arduino hidden under a breakout board.
  8. This madness is happening

    I believe that this is actually a fairly common DIY project that people do as long as the center brace is not a part of the rim. As shown in the pictures, the center brace is connected to the glass itself and is still intact. Buying a rimless tank is more expensive then buying a used on with a rim and taking it off. The center brace keeps it from bowing ever so slightly which would cause stress of the silicon seals. If were connected to the rim I would be super worried for sure!So I would say he's safe because the structure of the tank is sound and the rim on this seems to have been purely for aesthetics but I could be wrong. It's a good point to put out there. Basically what you explained. The trim was glued to the rim, but it wasn't even connected to each other at the corners. The tank was in poor shape when we bought it, so one of the trim pieces nearly fell off with a slight upward pull. So we peeled off the trim and cleaned the excess silicone. We revealed the tank, water tested it, and it's been going for a month. But if there is a stress point somewhere, hopefully we get a sign of a leak first before the whole thing burst. That'd suck!
  9. Planted Tank Stuff

    I understand your reasoning, but it would be heartbreaking to tear down this beautiful tank! Btw, I recently ordered some plants, and your crypt inspired me to try some new plants. Sweet! I like the texture and color of the leaves on this plant. You should have no issues growing a range a crypts. They melt a little, but just pay attention to new growth, don't fret about the old leaves that may not look too hot lol. Can wait to see some picks of your new plants.
  10. Planted Tank Stuff

    I have two shubunkins and they are doing very well. As the plants grow I identify the ones that aren't competing well and pull them out, in an attempt to make the tank more swimmable. I cut some tunnels behind this crypt for them to swim through, and that little crypt on the left in the corner was pulled out. They fancy one particular sword that they chew to bits. The other couldn't handle the nipping so I pulled it out too. They spend most of their time rummaging around the base of the plants, but I'm growing concerned about the gravel. Debating upgrading and relocating the tank to a different wall, switch to sand, with a less dense plant environment.
  11. Planted Tank Stuff

    Right before a trim....
  12. This madness is happening

    Ok, so the tank has been cycling for what I think is a month but my roommate thinks it's been more like two. So here's the situation. We seeded the tank with some live rock from the old tank. We dosed ammonia. After a month of testing and adding ammonia we are getting some odd readings. It looks like nitrites are cycling out the system faster than the ammonia. When we dose the tank to 1ppm ammonia, the tank cycles down to .25 ppm ammonia and 0 nitrites. We've don't two wc to kind of reset the tank. Could something be inhibiting the ammonia eating bb?
  13. We drilled our 100 gallon no problem. Go slow and have an assistant pour water on the drill spot to cool it. Go slow or you'll get chips near the end of the cut, but nothing that will harm the integrity, just makes nasty cuts. Good luck. This thread is from 2013, guys. Welcome to Koko's! Ha!
  14. We drilled our 100 gallon no problem. Go slow and have an assistant pour water on the drill spot to cool it. Go slow or you'll get chips near the end of the cut, but nothing that will harm the integrity, just makes nasty cuts. Good luck.
  15. Planted Tank Stuff

    I do that everyday. Or at least I try. I'll take my coffee or tea in front of tank. I wrote part of my master's thesis in front of it lol. I would say it's nice to watch them swim, but they just beg incessantly. [emoji1]
×