Jump to content
Kokos Goldfish Forum

JouteiMike

Swimming Fry
  • Content Count

    61
  • Joined

  • Last visited

Community Reputation

5 Neutral

Previous Fields

  • Gender
    Male
  • Age
    27
  • Location
    Connecticut
  • Referred By
    Internet
  • How many Goldfish
    4
  1. Oops forgot to reply Alex. Yeah I forgot to add I ditched the carbon from the 110s, think I still have them under the tank somewhere though. I find even when ditching the carbon there's not much excess room for much. I see no harm in adding a polishing pad, but no real benefits either if my water is pristine without them.
  2. Hello fellow Connecticutian! Pictures of your pond are a must please!
  3. I see, sorry I couldn't be of any help. Hopefully Eheim will have the answer.
  4. I have the same pressure problem, and with winter coming, the draining outside won't be practical, so I recently got a pond pump to drain the tank. It's great. It drains quickly and won't suck up any fish. But it doesn't vacuum. I got this one, in case you are interested. http://www.harborfre...pump-68395.html I hope your fish recovers quickly. I've done the same thing, and I now cover the siphon with mesh from a bag of oranges. A little word of advice if you are going to use the netting from the onion sack: In addition to what pretty fish said, I was wondering if you have a bare-bottom tank or have gravel/sand? If you have gravel, make sure you cut it bigger than you need. This way you have ample slack that will allow you to jam the siphon tube into the gravel without putting strain on the net. But if you have a bare-bottom, then it doesn't really matter! Maybe you need bigger mesh. I use mesh from a bag of oranges, and it is very open. It doesn't slow things down at all. Could be. I've tried many different methods in the past and I just didn't really care to have anything attached to the end of my python. Now I am just extra careful.
  5. Since this happened to me in the past, I very seldom leave the python siphon tube exposed and unprotected while it's running if I turn my back on the aquarium. I've tried using netting with rubber bands in the past, and to be honest, it really slowed things down for me, got in the way, and I didn't really care for it. So now I just keep an extra eye on my fish, and if I have to turn my back, I bury the open end in the gravel, so it stays semi-filled with rocks. Now I know many of you have bare bottom tanks, but for those who have gravel or even sand, this would work as well if you didn't want to use the netting or sponge as a protector when you have to turn your back to the tank or walk away temporarily. A little word of advice if you are going to use the netting from the onion sack: In addition to what pretty fish said, I was wondering if you have a bare-bottom tank or have gravel/sand? If you have gravel, make sure you cut it bigger than you need. This way you have ample slack that will allow you to jam the siphon tube into the gravel without putting strain on the net. But if you have a bare-bottom, then it doesn't really matter!
  6. Commercial food I always make sure I have on hand: New Life Spectrum and Pro-Gold. I like to mix it up a little for my goldies between the two. I used to make my own gel foods, but haven't in years, and I never tried commercial gel foods such as repeshy soilent-green, but have read a great deal about them, heard super testimonials, and recommend it as well. Instead, nowadays I supplement with blanched spinach, peas, brocolli, algae tablets and softened bits of carrots, apples, pears sparingly as a treat. I put them in loosely and let them chase and forage for them. Also I've been experimenting with breeding my own brine shrimp for another treat for them, it's quite fun as well.
  7. What are you using for media, Mike? Hey Alex. I actually use solely the media that came with each filter, no more, no less. Seems to allow the filter to perform as it was intended. Sometimes I wonder if adding additional media puts an extra strain on the filter, since it was designed to run with typically what it comes with, but I know there are exceptions out there that specifically come with extra room. I find that my 110's don't really have much extra room when stocked with the foam block, and the bag of ceramic rings. I couldn't picture putting in addition media like a polishing pad...would be too cramped in my opinion.
  8. Yes, doesn't do anything; as I stated above, I've reset it numerous times to factory default as well which is max output on automatic, not manual mode either. Hmmm...wish I was more familiar with this filter to help out. I only vaguely know the set up and operations of it, as my friend has the same one and he gave me a tutorial maybe a year ago.... Good luck. My guess is either you have too much filter media in it and it's sensing that it needs a "cleaning," or there's too much slack in the intake/output hose that causing it to sense an interference. Any of those sound plausible in your set up? Maybe you can take a picture how you have it set up. Also, maybe you can try to take out some media, stow it in a bucket, and run the filter with less media in it to see if it still flashes the amber service light. Just a few suggestions.
  9. Have you tried holding down the "S" button, then pressing it again quickly?
  10. I actually don't use any; I have in the past, but honestly, I don't really notice a difference. I used to use the Rena Filstar brand ones back when I had a XP3 canister running. I noticed they get gunked up rather quickly which I know is evidence that it's doing its job and all. Now I run 2 aquaclear 110s with no polishing pad, and a pretty decent bio-load, and I don't notice the water being any less clear that it's ever been, in fact, it's been looking clearer than ever. Guess it's a personal preference, so good luck!
  11. I've actually had that happen to me before as well, now I'm extra careful. A guard of some sort is a great suggestion. I bet your fish will be fine, as fish tend to heal very rapidly if the water is kept clean. The best option for you is to let the fish chill out, keep an eye on the injuries, and perform more frequent water changes as stated. Oh I just wanted to add, my fish had identical injuries and symptoms to yours, and he persevered with no salt, or needing to take him out. But I'm not trying to say don't add salt, or don't take him out, but letting him relax for a day or two and keeping an eye on him may be the best plan of action for now so you don't further stress him out.
  12. 110's are the best. Alex's advice about the roots are key! Good luck.
  13. My only guess is that the QT tank is a much smaller volume, so it doesn't have a large buffer system and is more susceptible to a dip in the pH. That's a good suggestion from fantail! The idea is to just slowly acclimate the fish to the main tank. You could even put the fish in a similar to the kind LFS's use, float the fish in the main tank, and slowly add little amounts of water from the main tank to the bag, whichever you think is easier.
  14. While I know this, I just wasn't sure if 4prettyfish did, she seems relatively new to the hobby and I wanted to make it clear that the idea of actually rinsing bio media is not necessary, ever, unless it is literally clogged with detritus or other matter. I guess we just have different methods of doing things. The only "rinsing" I did was back when I used Tetra Whisper power filters, the original ones about 10 years ago. The bio media was a black sponge and that would defintiely get clogged over time. So I could dip it in a container of tank water and knock it around a little. But with my 2 Aquaclear 110s that I run now, and one I've been running for 6 years, I have never needed to rinse or slosh the ceramic rings around at all, I just place them gently in a container of tank water. While vigorous rinsing and squeezing of mechanical sponges in tank water is fine, I guess I just have a different view and I get nervous when I hear anyone mentioned they are going to "rinse" their bio media. I shouldn't jump to such conclusions...
×
×
  • Create New...