[pm94]

This is a finished tank stand for a 125 gallon tank I put together
with help from dad and his work shop. It's stained and varnished
to make it look purdy. :D

Attached File(s)

•  Finished_stand.jpg (37.31K)
  Number of downloads: 346

[technogold]

Nice work Paul, having access to a workshop is a great bonus, I have a workshop where I work and have done two stands. There is a great feeling of accomplishment when you DIY :D

Hope to see some pics when your tank is set up.

Thanks for the pics :)

[pm94]

Here's one without the stain. Constructed of 4x4's for the corners
and middle supports. 2x4's for the lower stability, and 2x6's for
the upper support and for the tank to rest on.

Attached File(s)

•  Unstained_stand.jpg (35.71K)
  Number of downloads: 134

[pm94]

Here's a look at how the corner joints/bolts all went together.
Gotta make sure they go in at different levels, or they run into
each other.

Attached File(s)

•  Corner_bolts.jpg (36.04K)
  Number of downloads: 114

[pm94]

Here's another look at the corner joints on the upper part.

Attached File(s)

•  Corner_joint.jpg (36.03K)
  Number of downloads: 83

[pm94]

Here's a view of the 4x4 middle support cut to take the 2x4
and 2x6.

Attached File(s)

•  Middle_support.jpg (28.09K)
  Number of downloads: 94

[pm94]

Here's an overview of the corner support 4x4

Attached File(s)

•  Corner_support.jpg (38.41K)
  Number of downloads: 73

[koko]

Very nice Hun. How long did it take you guys to make it?

What tank is this for?

[pm94]

Close up of the top part of the corner support. The knob that
is remaining, goes inside of the 2x4/2x6 frame.

Attached File(s)

•  Top_corner.jpg (37.16K)
  Number of downloads: 51

[pm94]

Here's a look at the bottom corner cut out. These are snug
fit to get the 2x4's into.

Attached File(s)

•  Bottom_corner.jpg (30.75K)
  Number of downloads: 47

[pm94]

Supplies used:

4x4x8'-2

2x4x8'-2

2x6x8'-2

3/8" lagbolts-40

3/8" washers-40

Colonial maple wood stain-1 pint

Semi-gloss varnish-1 quart

Total bill was around $50 (US)


It took 5 or 6 different days to put it all together including stain
and 3 layers of varnish with sanding included. The overall length
is 6'1/2" and width is 19". That gives you a 1/4" wider on each
side of the tank. The height is 26", this allows me to be able to
reach the bottom or back of the tank with out using a step stool.
Before placing the tank on the stand, I put wax paper down.
This prevents the tank becoming bonded to the stand and
impossible to seperate. :) Pics of the tank will arrive at some
point. I'm still playing around with it. :rolleyes:

[Fishmerised]

Paul, the stand looks real 'purdy' and solid as a tank (of the armoured variety). Well done!

$50 is money well spent, how much would a comparible stand cost to buy retail?

[pm94]

Thanks all. :) It's just a plain looking stand, so nothing to really
compare it to. I haven't found anything *yet* for a 125 gal
tank for prices, but one for a 75 gal was over the $50 mark at
Big Al's.com I could put doors on it if I wanted to, but like having
the open accessability underneath. :rolleyes: This is the second
stand that we (pop and me) have put together. He figures we've
about got this down to a *science.* B)


One thing to remember when selecting wood, make sure every
board is straight-no warping/twisting. Try and pick surfaces that
don't have any printing on them or teeth marks from being handled.

[Black oranda]

Wow thats huge, it looks like it could take ALOT of weigh lol
(well im hopeing so... since it has to hold a 125 gallon)

Great job, Congrats :D

[toothless]

Awesome job, Paul! :D

Looks like your no stranger to woodworking. I would sooooo love to have access to a workshop. Well, one near me anyway. I can go to my grandfathers and use his but that a road trip just to get there.

[kpdogg]

Tank Stand

Nice stand, wish i had room for one that big! I just built one also for my corner tank pentagon style. In the store they wanted $240 cdn for a stand and I built mine for $60 cdn.

This post has been edited by kpdogg: 05 March 2005 - 07:00 AM

[pm94]

Figured you'd like it toothy, being the sawdust man you are. :lol:



kpdogg, it looks sweeeeet. :)

[kpdogg]

Thanks, just doing the cycling of the tank. Hope to move my fish over in a few weeks. :)

[fondoo]

i remember seeing someone selling those wood stud fish tank stands on ebay, but i cant find them anymore.

[tinkerbell]

wow!! its lovely!!! you done a real good job there!! :)